Untitled Document
 
 
 
 
Untitled Document
 
   
 
   
 
 
Intake & discharge connection:
Polypropylene (PPG) 1" Female NPT
Kynar® (PVDF) 1" Female NPT
Aluminum (ADC-12) 1" Female NPT
Stainless Steel (316) 1" Female NPT
Cast Iron 1" Female NPT
Air inlet (incl. ball valve): 3/8" Female NPT
Air exhaust (incl. silencer): 3/4" Female NPT
ANSI Flange also available consult Yamada.
 
Diaphragm Material Temperature
Neoprene 180°F (82°C)
Buna N 180°F (82°C)
EPDM 212°F (100°C)
Hytrel® (TPEE) 248°F (120°C)
Santoprene® (TPO) 212°F (100°C)
Viton® fluoroelastomer 248°F (120°C)
Teflon® (PTFE) 212°F (100°C)
 
*The maximum liquid temperature for metal and Kynar®-fitted pumps is determined by the elastomer(diaphragm material). Polypropylene pumps have a maximum liquid temperature of 180°F (82°C) regardless of diaphragm material.
 

Air Supply Pressure (All Models)
20?100 PSI (1.4?7 kgf/cm²)

Discharge Volume Per Cycle
Rubber diaphragm: 0.22 gallons (833 cc)
PTFE diaphragm: 0.21 gallons (787 cc)

Maximum Cycles Per Minute
Rubber diaphragm: 210
PTFE diaphragm: 210

Maximum Size Solid
3/16" (4.8 mm)

Maximum Dry Suction Lift
Rubber-fitted pump capability: 18-feet

Aluminum Air Motor:
Aluminum air motors are standard
on metal pumps; glass-filled polypropylene
air motors are standard on plastic and
Kynar® pumps. Optional air motors on page 28.

All Polypropylene, Aluminum, Cast Iron, and SS Hytrel®
fitted pumps include Buna N check balls & o-rings and
Santoprene® fitted pumps include EPDM check balls &
wetted o-rings. Kynar® (PVDF) pumps fitted with Santoprene®, Hytrel®, or Teflon® include Teflon® check balls & o-rings. Kynar®/EPDM fitted pumps include EPDM check balls & o-rings and Viton® fitted include Viton® balls & o-rings.

 
 
To calculate performance for Santoprene® and
Hytrel®-fitted pumps, use Rubber Diaphragm Curve.