Untitled Document
 
 
 
 
Untitled Document
 
   
 
   
 
 
Intake & discharge connection:
Polypropylene (PPG) 3" ANSI B16.5 #150
Aluminum (ADC-12) 3" ANSI B16.5 #150(with tapped 3" Female NPT)
Stainless Steel (316) 3" ANSI B16.5 #150 or 3" Female NPT
Cast Iron 3" Female NPT
Air inlet (incl. ball valve): 3/4" Female NPT
Air exhaust (incl. silencer): 1" Female NPT
 
Diaphragm Material Temperature
Neoprene 180¡ÆF (82¡ÆC)
Buna N 180¡ÆF (82¡ÆC)
EPDM 212¡ÆF (100¡ÆC)
Hytrel¢ç (TPEE) 248¡ÆF (120¡ÆC)
Santoprene¢ç (TPO) 212¡ÆF (100¡ÆC)
Viton¢ç fluoroelastomer 248¡ÆF (120¡ÆC)
Teflon¢ç (PTFE) 212¡ÆF (100¡ÆC)
 
*The maximum liquid temperature for metal pumps is determined by the elastomer (diaphragm material).
Polypropylene pumps have a maximum liquid temperature of 180¡ÆF (82¡ÆC) regardless of diaphragm material.
 

Air Supply Pressure (All Models)
20?100 PSI (1.4?7 kgf/cm©÷)

Discharge Volume Per Cycle
Rubber diaphragm: 2.26 gallons (8.57 liters)
PTFE diaphragm: 1.0 gallons (3.8 liters)

Maximum Cycles Per Minute
Rubber diaphragm: 95
PTFE diaphragm: 160

Maximum Size Solid
13/32" (10 mm)

Maximum Dry Suction Lift
Rubber-fitted pump capability: 19-feet

Aluminum Air Motor:
Optional: Epoxy-coated, Teflon¢ç-coated,
or Electroless Nickel Plate

Notes: Hytrel¢ç-fitted pumps include Buna N check
balls & wetted o-rings. Santoprene¢ç-fitted pumps
include EPDM check balls & wetted o-rings.

 
 
To calculate performance for Santoprene¢ç and
Hytrel¢ç-fitted pumps, use Rubber Diaphragm Curve.